FWD: The President of Intel responds

chou@cs.ucla.edu
Sun, 27 Nov 94 16:18:57 PST

Piping...Path:
delphi.cs.ucla.edu!whirlwind!library.ucla.edu!agate!howland.reston.ans.net!m
ath.ohio-state.edu!magnus.acs.ohio-state.edu!csn!carbon!carbon!not-for-mail
From: jrothman@carbon.cudenver.edu (Jay Rothman)
Newsgroups: sci.stat.math,sci.stat.edu,comp.theory
Subject: The President of Intel responds...
Date: 27 Nov 1994 14:25:25 -0700
Organization: University of Colorado at Denver
Lines: 112
Distribution: inet
Message-ID: <3batg5$ju@carbon.cudenver.edu>
NNTP-Posting-Host: carbon.denver.colorado.edu
X-Newsreader: TIN [version 1.2 PL2]
Xref: delphi.cs.ucla.edu sci.stat.math:3284 sci.stat.edu:3372
comp.theory:11379

Newsgroups: comp.sys.intel
Subject: My Perspective on Pentium - AGS
Date: 27 Nov 1994 19:31:21 GMT
Organization: Netcom
Lines: 102
Distribution: world
Message-ID: <3bamq9$avt@ixnews1.ix.netcom.com>
NNTP-Posting-Host: ix-pa3-16.ix.netcom.com

Andy Grove has asked me to post the following for him. Since it is the

weekend and we are out of the office, I am posting from my home system.

Richard Wirt
Director SW Technology
Intel Corp

This is Andy Grove, president of Intel. I'd like to comment a bit on

the conversations that have been taking place here.

First of all, I am truly sorry for the anxiety created among you by

our floating point issue. I read thru some of the postings and it's

clear that many of you have done a lot of work around it and

that some of you are very angry at us.

Let me give you my perspective on what has happened here.

The Pentium processor was introduced into the market in May of '93

after the most extensive testing program we at Intel have ever

embarked on. Because this chip is three times as complex as the 486,

and because it includes a number of improved floating point

algorithms, we geared up to do an array of tests, validation, and

verification that far exceeded anything we had ever done. So did many

of our OEM customers. We held the introduction of the chip several

months in order to give them more time to check out the chip and their

systems. We worked extensively with many software companies to this

end as well.

We were very pleased with the result. We ramped the processor faster

than any other in our history and encountered no significant problems

in the user community. Not that the chip was perfect; no chip ever

is. From time to time, we gathered up what problems we found and put

into production a new "stepping" -- a new set of masks that

incorporated whatever we corrected. Stepping N was better than

stepping N minus 1, which was better than stepping N minus 2. After

almost 25 years in the microprocessor business, I have come to the the

conclusion that no microprocessor is ever perfect; they just come

closer to perfection with each stepping. In the life of a typical

microprocessor, we go thru half a dozen or more such steppings.

Then, in the summer of '94, in the process of further testing (which

continued thru all this time and continues today), we came upon the

floating point error. We were puzzled as to why neither we nor anyone

else had encountered this earlier. We started a separate project,

including mathematicians and scientists who work for us in areas other

than the Pentium processor group to examine the nature of the problem

and its impact.

This group concluded after months of work that (1) an error is only

likely to occur at a frequency of the order of once in nine billion

random floating point divides, and that (2) this many divides in all

the programs they evaluated (which included many scientific

programs) would require elapsed times of use that would be longer than

the mean time to failure of the physical computer subsystems. In

other words, the error rate a user might see due to the floating point

problem would be swamped by other known computer failure mechanisms.

This explained why nobody -- not us, not our OEM customers, not the

software vendors we worked with and not the many individual users --

had run into it.

As some of you may recall, we had encountered thornier problems with

early versions of the 386 and 486, so we breathed a sigh of relief

that with the Pentium processor we had found what turned out to be a

problem of far lesser magnitude. We then incorporated the fix into

the next stepping of both the 60 and 66 and the 75/90/100 MHz Pentium

processor along with whatever else we were correcting in that next

stepping.

Then, last month Professor Nicely posted his observations about this

problem and the hubbub started. Interestingly, I understand from

press reports that Prof. Nicely was attempting to show that

Pentium-based computers can do the jobs of big time supercomputers in

numbers analyses. Many of you who posted comments are evidently also

involved in pretty heavy duty mathematical work.

That gets us to the present time and what we do about all this.

We would like to find all users of the Pentium processor who are

engaged in work involving heavy duty scientific/floating point

calculations and resolve their problem in the most appropriate fashion

including, if necessary, by replacing their chips with new ones. We

don't know how to set precise rules on this so we decided to do it

thru individual discussions between each of you and a technically

trained Intel person. We set up 800# lines for that purpose. It is

going to take us time to work thru the calls we are getting, but we

will work thru them. I would like to ask for your patience here.

Meanwhile, please don't be concerned that the passing of time will

deprive you of the opportunity to get your problem resolved -- we

will stand behind these chips for the life of your computer.


Sorry to be so long-winded -- and again please accept my apologies

for the situation. We appreciate your interest in the Pentium

processor, and we remain dedicated to bringing it as close to

perfection as possible.

I will monitor your communications in the future -- forgive me if I

can't answer each of you individually.

Andy Grove